• No products in the cart.
View Cart
Subtotal: $0.00

Shop

NV-HT Chromoly 29er/27.5+ Enduro Hardtail | Hardcore Hardtail

$799.00

$
Share This:

Description

*Order Now To Be Put In Queue for Fastest Delivery – Will Ship in Approximately 4 Weeks*

 

USA Hand Built Chromoly Steel Hardcore Hardtail, by Experienced Riders, for all Riders


*This package only includes what is shown in the drop down options above and what’s listed in the specs*

Go Fast – No Rear Squish Necessary

Thanks to modern geometry, you can feel more confident on your next chromoly steel hardtail frame and even cut your segment times down. Give the NV-HT a quick rip down your favorite trail and it will give you smiles in return. The lower seat tube allows more leg travel to take up the lack of a shock with your legs. This gives you more room between your rear-end and the saddle. All of this means that NV-HT was designed to allow you to maneuver around the center of gravity for optimal handling and feel. Don’t worry if you have long legs! We have dropper seat posts with 210mm (8.25″) travel, so you’re covered!

Beat Your Friends – On a Steel Hardtail 

The NV-HT chromoly steel enduro hardtail is long, low and slack. What this means is you’re planted for speed, centered for hitting drops, rocks and roots and balanced for corners and sharp turns. Lacking a rear shock doesn’t mean your frame should lack performance.

Chromoly Steel Hardtail = Pedal Beast

We set out to make a chromoly steel hardtail mountain bike frame that was balanced. Giving you the confidence of a full suspension mountain bike frame but not the high cost. The seat tube angle is just right, not too steep, not too slack. It stays out of your way for descents but in a nice spot for aggressive climbing.

Steel Is Real

So many ask: “What does that even mean!?”. It’s open to your imagination, your passion, your emotion and your personality. Chromoly steel construction of the NV-HT lands you right in that sweet spot of high performance and comfort. The harmonics of chromoly steel, the physics going on that we can’t experience with the naked eye lend to a smooth and stately ride quality that no other material matches in hardtail mountain bike frames. Less noise chatter, less vibration, more support, yet more compliance. An almost magical blend ready for a bad ass rider looking for a new challenge or a new rider excited to go full send on a quality rig for their first bike, is that you?

Additional information

Weight 200 oz
Dimensions 48 × 19 × 8 in

Geometry & Sizing

The NV-HT was developed with progressive forward thinking geometry in mind. Utilizing slack geometry with proper low-offset forks provides a stable, fast and well handling machine.

Geometry SIZE 1
(5’5″/1.65m to 5’10″/1.78m)
SIZE 2
(5’10 /1.78m to
6’1″/1.84m)
SIZE 3
(6’1″/1.84m to
6’6″/1.98m)
Head Tube Angle 29″ Front/29″ Rear
62.5°
(180mm Forks)
63° (170mm Forks)
63.5° (160mm Forks)
62.5°
(180mm Forks)
63° (170mm Forks)
63.5° (160mm Forks)
62.5°
(180mm Forks)
63° (170mm Forks)
63.5° (160mm Forks)
Seat Tube Angle 29″ Front/29″ Rear
75°
(180mm Forks)
75.5° (170mm Forks)
76° (160mm Forks)
75°
(180mm Forks)
75.5° (170mm Forks)
76° (160mm Forks)
75°
(180mm Forks)
75.5° (170mm Forks)
76° (160mm Forks)
Head Tube Angle 29×2.5 Front/27×2.6″ Rear
61.7°
(180mm Forks)
62.5° (170mm Forks)
63.2° (160mm Forks)
61.7°
(180mm Forks)
62.5° (170mm Forks)
63.2° (160mm Forks)
61.7°
(180mm Forks)
62.5° (170mm Forks)
63.2° (160mm Forks)
Seat Tube Angle 29×2.5″ Front/27.5×2.6″ Rear
74°
(180mm Forks)
74.8° (170mm Forks)
75.6° (160mm Forks)
74°
(180mm Forks)
74.8° (170mm Forks)
75.6° (160mm Forks)
74°
(180mm Forks)
74.8° (170mm Forks)
75.6° (160mm Forks)
Reach 480mm 510mm 530mm
Front Center 830mm 860mm 880mm
Wheelbase 1250mm 1280mm 1300mm
Effective Top Tube (approximate) 621.7mm 651.4mm 671.3mm
Seat Tube Length 380mm 420mm 450mm
Stack 623mm 623mm 635mm
Chainstay Length 420mm 420mm 420mm
Headtube Length (Including Headset)
120mm 120mm 120mm
Bottom Bracket Drop
41mm 41mm 41mm

Frame Specs

No One-Off specs here, we designed the NV-HT frame to accept all current popular standards including internal routed dropper post, boost, tapered steerer tube forks, 12-speed etc.

NV-HT FRAME SPECS
Frame Weight 7lbs/3.15kg To 10lbs/4kg (Size 1 to Size 3)
Bottom Bracket Standard BSA Threaded 73mm (most common type)
Hydraulic Disc Brake Mount Rear IS 160 (+0mm, use “Front” standard, not rear)
Hydraulic Brake Disc Diameter Max (Rear) 203mm
Forks Steerer Tapered Forks 1.5″ > 1-1/8″ 44mm headset
Headset Standard zs44/ec44 (example: Cane Creek Part Number BAA0717K or other brand)
Rear Wheel Tire Clearance Up To ~27.5×2.6″ to 29×2.5″
Hub Spacing Rear BOOST 148mmx12mm
Max Fork Travel 180mm
Seatpost Diameter 31.6mm
Dropper Seatpost Cable Routing Internal
Seat Post Clamp 34.9mm (Included)
Rear Axle 12×1.5 TPI 170mm Long
Derailleur Hanger Included
ISCG-05 Welded on BB Adapter

Color Examples

Best Steel Mountain Bike Frame

Best Steel Hardtail Mountain Bike Frame

Best Steel Mountain Bike Frame

Best Full Suspension Mountain Bikes

Best Steel 29er Full Suspension Mountain Bike

Steel 29er Mullet Frame

Steel Hardtail Mountain Bike

Reviews

There are no reviews yet.

Be the first to review “NV-HT Chromoly 29er/27.5+ Enduro Hardtail | Hardcore Hardtail”

Your email address will not be published. Required fields are marked *

Scroll to top